Tires/Tubes

Among our most versatile drop bar tires, the Venture delivers optimal performance across the widest range of conditions to serve as a truly set-it-and-forget-it gravel tire for riders who demand traction across a wide variety of terrain. Elevated centerline ridges provide consistent working edges that dig in whether hammering up a climb or leaning into a turn. Two rows of outer knobs provide confidence regardless of how hard you're cornering while also providing substantial sidewall protection. Venture is the tire of choice when the destination is unknown but you're sure to encounter a variety of terrain along the way. SG2 PUNCTURE PROTECTION: These tires are available with our all-new SG2 Puncture Protection, which is a lightweight nylon insert that provides bead-to-bead coverage and ensures every area of the tire is defended against slashes and punctures. As events become progressively rougher and cyclists pedal farther, gravel gets tougher. It only makes sense for gravel tires to become tougher as well. - Nylon fibers have a flat profile, which reduces the amount of rubber needed to fill the gaps between fibers and minimizes weight. - Protected SG2 gravel tires feature a 120tpi casing, which improves suppleness compared to a traditional 60tpi tire. - SG2 was specifically designed to be a puncture protection layer, but it also improves air retention and eliminates seeping at the sidewall. FEATURES: - The large, high-volume footprint of each Venture tire allows for more working edges of the tread to always be in contact with the terrain. - Rounded profile with vertical channels to enhance cornering characteristics. - High volume casing enables a comfortable ride. - Dual Compound Rubber means a fast-rolling tire with great corning traction.

- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 98g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Shaft Type: Threaded - Valve: Standard Schrader - Valve Core: Removable - Wall Thickess: 1 - Tube Compound: Butyl - Weight: 500

There are routes covered with jagged flint rock, where the wind is unforgiving, and the destination is far beyond the horizon. For the toughest days of gravel, when winning looks like finishing, we created the Cannonball. We designed the Cannonball to accommodate modern gravel rigs whether you’re racing Dirty Kanza, Trans Iowa, or Mid-South… it’s conquered them all. The directional, tight-knit center tread efficiently decreases rolling resistance while the side knobs increase cornering traction. The center tread’s diamond pattern is optimized specifically for gravel riding and sheds dirt and gravel debris. - Light and Supple—When extra puncture protection isn’t necessary, our light and supple casing offers decreased weight and a comfortable, ultra-supple ride quality at lower pressures when set up tubeless. - Durable Sidewall—This construction consists of a robust woven nylon composite reinforcement between the outer rubber and the inner casing within the tire’s sidewalls to prevent tearing and abrasions.

This is Surly’s 29 x 3-inch Presta valve tube. It fits their Knard tires and is made of butyl rubber.

Lou is the 26” x 4.8” rear-specific mate to Bud. Lou’s tread is much like Bud’s with tall knobs designed to grind, crawl and claw its way over rooty, rocky, wet, muddy, loose or otherwise inhospitable terrain. Lou’s tread pattern is a bit different, however, made for stability while both braking and accelerating. Its casing is durable, thin-walled 120tpi which conforms well to the ground surface shape. Folding Kevlar bead. - Folding bead - Casing: 120 TPI - Max pressure: 30psi - Weight: 1585g

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve: Presta - Butyl rubber - Wall thickness: 0.9mm

Park/street tire, with directionally grooved tacky tread. - ISO: 355 - Bead: Wire

Park/street tire, with directionally grooved tacky tread. - ISO: 406 - Bead: Wire

- Slick center tread with continuous curved lines on each side of the outer tread surface - Perfect for old-school rides such as the Schwinn Stingray or new BMX bikes with a knack for old-school vibes

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Urban tire with raised center for reduced rolling resistance - Size: 16 x 1 3/4 - ISO 317

- Hybrid tire for street or light trail use - Wire bead

- Hybrid tire with small lugs suitable for road, light trail use - Wire bead - Size: 27 x 1 3/8

- Tight directional center tread pattern with lateral knobs for traction - Wire bead - Size: 26 x 1.95

- Durable street/park tire with deep, narrow grooves for traction

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 650B x 1 1/2 - ISO 584

- Super wide cruiser tire provides a comfortable ride - Wire bead - ISO 406

The Jake Seeley signature Street Sweeper tire features a directional, dual compound construction. - Center tread features softer durometer - Side tread features a harder durometer to withstand grinds

The Current tire features a directional grippy tread pattern with good shape and tire width. It’s an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes. - Grippy tread pattern - Affordable high-pressure tire