Bottom Brackets

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

Compared to the power transfer of the conventional square taper spindle, the 8-splined OCTALINK interface that connects the bottom bracket and crankset increases the strength and rigidity for the entire assembly.

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings. Features • BB Cups are forged & CNC machined from 6066 aluminum. • Tapering wall construction to minimize weight. • Custom 6805 16 ball retainer bearing • Bearings feature our custom triple wiper seal to better retain grease & keep contaminants out. • Bearings are factory filled with Phil Wood waterproof grease — tested & proven to extend bearing life.

Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration

- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.

High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts

Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g

- Compatible with both American and Mid style BB shells - 6061-T6 full CNC alloy construction - Anodized surface finish - Weight: 255g - Cup Type: Press Fit - Cup OD/Bearing OD: 41mm or 51mm